HOW IT WORKS
The Airpura I600 air purifier contains a cleanable pre-filter and large, 3″-deep HEPA filter. Air first passes through the pre-filter designed to capture large particles. After the bigger particles are removed, the air passes through the true HEPA filter that traps 99.7% of particles, as small as 0.3 microns. The optional HI-C carbon weave absorbs odors, chemicals, and gases.
This is a great solution for healthcare clinics and institutions. It weighs only 35 pounds and sits on lockable casters for easy mobility. There are also optional negative air accessories for creating an isolation area. See Airpura’s I600 Fact Sheet for more information.
ADDITIONAL FEATURES
The Airpura I600 is made of powder coated steel in Montreal, Canada. It features simple-to-use dial control with infinite number of speeds. Casters allow you to easily move the purifier.
FILTER CHANGES
Filter changes require flipping the unit upside down, removing screws with a screwdriver. Then you must remove the used filters and replace the new filters according to the manual. After replacing the filters, the bottom panel needs to be screwed back on and the purifier turned back upright.
AIR FLOW AND POSITIONING
Air is pulled in from all directions around the sides of the air purifier and clean air is pushed out from 360 degrees around the top of the sides of the purifier. Place so that the sides of the air purifier are not blocked.
WHAT’S IN THE BOX
Unit
- Size: 23″ Height x 15″ Width x 15″ Deep
- Weight: 35 lbs
Filters (pre-installed in unit)
- Pre-Filter
- 3″ HEPA Filter
- Sleeve for Pre-Filters (black units only)
OPTIONAL FEATURES
- HI-C Carbon Weave Filter
- Negative Air Accessories
- 220V power supply (please specify in which country the unit will be operated)
Optional features must be customized to your unit and may have an additional charge. Call (800) 334-1494 to complete your order with an Air Purification Consultant.